某园区组网方案如图1-1所示，数据规划如表1-1内容所示。
[问题1] 以Switch3为例配置接入层交换机，补充下列命令片段。< HUAWEI> (1)[HUAWEI] sysname Switch3 [Switch3] vlan batch (2)[Switch3] interface GigabitEthernet 0/0/3 [Switch3-GigabitEthernet0/0/3] port link-type (3) [Switch3-
GigabitEthernet0/0/3] port trunk allow-pass vlan 10 20 [Switch3-GigabitEthernet0/0/3] quit [Switch3] interface GigabitEthernet 0/0/1 [Switch3-GigabiEthernet0/0/1] port link-type (4) [Switch3-GigabitEthernet0/0/1] port default vlan 10[Switch3-
GigabitEthernet/0/1] quit[Switch3] stp bpdu-protection [问题2] 以Switch1为例配置核心层交换机，创建其与接入交换机、备份设备以及出口路由器的互通VLAN，补充下列命令。< HUAWEI> system-view[HUAWEI] sysname Switch1 [Switch1] vlan batch (5) [Switch1] interface GigabitEthernet/0/1 [SwitchI-GigabitEthernet0/0/1] port link-type trunk [Switchl-GigabitEthernet0/0/1] port trunk allow-pass (6)[Switch1-GigabitEthernet0/0/1] quit[Switch1] interface Vlanif 10 [Switch1-Vlanif10] ip address 192.168.10.1 24 [Switch1-Vlanif10] quit[Switch1] interface Vlanif 20[Switch1-Vlanif20] ip address 192.1 68.20.1 24[Switch1-Vlanif20] quit[Switch1] interface GigabitEthernet 0/0/7[Switchl-GigabitEthernet0/0/7] port link-type trunk[Switch1-GigabitEthernet0/0/7] port trunk allow-pass vlan 100[Switch1-GigabitEthernet0/0/7] quit[Switch1] interface Vlanif 100[Switch1-Vlanif100] ip address (7)[Switch1-Vlanif100] quit[Switch1] interface GigabitEthernet 0/0/5[Switch1-GigabitEthernet0/0/5] port link-type access[Switch1-GigabitEthernet0/0/5] port default vlan 300[Switchl-GigabitEthernet0/0/5] quit[Switch1 interface Vlanif 300[SwitchI-Vlanif300] ip address (8)[Switchl-Vlanif300] quit [问题3] 如果配置静态路由实现网络互通，补充在Switch1和Router上配置的命令片段。[Switch1] ip route-static (9) /默认优先级[Switch1] ip route-static 0.0.0.0 0.0.0.0 172.16.30.2 preference 70[Router] ip route-static (10) /默认优先级[Router] ip route-static 192. 168.10.0 255.255.255.0 172.16.10.1 [Router] ip route-static 192.168. 10.0 255.255.255.0 172.16.20.1 preference70[Router] ip route-static 192.1 68.20.0 255.255.255.0 172.16.10.1[Router] ip route-static 192.1 68.20.0 255.255.255.0 172.16.20.1 preference70
[问题1] 命令填空，一定要充分利用上下文之间的关系。[问题2] 还是根据上下文和表格中的地址参数，直接填写即可。[问题3] 还是根据上下文和表格中的地址参数，直接填写即可。
答案: [问题1](1) system-view (2) 1020 (3) trunk (4) access
[问题2] (5) 1020100300 (6) vlan1020 (7) 172.16.10.124或者172.16.10.1255.255.255.0 (8) 172.16.30.124或者172.16.30.1255.255.255.0
[问题3](9) 0.0.0.00.0.0.0172.16.10.2 (10) 0.0.0.00.0.0.0202.101.111.1
在几种不同类型的软件维护中，通常情况下（）所占工作量最大。
在()中，项目经理的权力是最小的。
在项目实施的过程中，项目经理通过项目周报中的项目进度分析图表发现机房施工进度有延期风险。项目经理立即组织相关人员进行分析，下达了关于改进措施的书面指令。该指令属于（ ）
The IT service manager resigns from a project that meets the scheduleand budget. After hiring an alternativenew manager, the team is opposed to the comments from the new manager. The team is at （） developmentstages。
（）is closet to Deming's definition of Quality。
The IT service manager has learned that a software canimprove the efficiency of current and future project tasks. Because the software is fresh to the Company. Theengineer is not familiar with the software. The lT service manager decides to send the highest level engineero attend the external training course. The proiect manager uses （） risk strategies。
The process control charts are used （）。
